- HOME(English) >ABX-51THY Designed for High Productivity and Flexibility (Go to products page)
Designed for High Productivity and Flexibility
In addition to the advantages of simultaneous machining on both spindles, the introduction of a Y axis facility on all three turrets, contributes to optimization of production layouts and increased productivity.
High productivity with a Y-axis on all three turrets
Simultaneous Y axis machining with the upper and lower turret on either spindle. Making one-hit machining easy.
40Nm Revolving tool
High rigidity, High torqe tool
High rigidity, High torqe tool
All three turrets are built to provide high rigidity and cutting stability whether turning drilling or milling. Coupled with the extensive range of standard & revolving attachments maximises production efficiency.
Tooling Area（zoom）
Tool Setter
Programmable Parts Catcher and Parts Conveyor
| ABX-51THY | ABX-64THY | ||
| Machining Capacity and Chuck System | |||
| Max Machining Diameter of Bar Work | L/R spindle | φ51mm/φ51mm | φ64mm/φ51mm |
| Collet Chuck Type | L/R spindle | Stationary type | Stationary type |
| Power Chuck | L/R spindle | 6"/ 6" hydraulic drive | 6"/ 6" hydraulic drive |
| Standard Machining Length | 125mm | 125mm | |
| spindle | |||
| Spindle Nose | L/R spindle | A2-6 / A2-6 | A2-8 / A2-6 |
| Spindle Motor (30 min. / Cont) | L spindle | 15/11 kW | 15/11 kW |
| R spindle | 7.5/5.5 kW | 7.5/5.5 kW | |
| Spindle Speed Range | L/R spindle | 50～5,000 min-1 | 40～4,000 min-1 |
| R Spindle Travel | Zsp axis | 756 mm | 756 mm |
| R Spindle Rapid Traverse Rate | Zsp axis | 30m/min | 30m/min |
| Turrets (Upper L/R Turrets & Lower Turret) | |||
| Type of Turret | 12 St Turret | 12 St Turret | |
| Shank Height of Square Turning Tool | □20mm | □20mm | |
| Diameter of Drill Shank | φ40mm,φ25mm,φ20mm | φ40mm,φ25mm,φ20mm | |
| Slide Travel | X1,X2,X3 axis | 190mm | 190mm |
| Z1,Z3/Z2 axis | 270mm / 550mm | 270mm / 550mm | |
| Y1,Y2,Y3 axis | ±40mm | ±40mm | |
| Rapid Traverse Rate | X1,X2,X3 axis | 16m/min | 16m/min |
| Z1,Z3/Z2 axis | 20 / 30m/min | 20 / 30m/min | |
| Y1,Y2,Y3 axis | 12m/min | 12m/min | |
| Turret Indexing & Clamp Method | AC Servo & Curvic C | AC Servo & Curvic C | |
| Revolving Tools (Option) | |||
| Max. Number of Revolving Tools | 36 | 36 | |
| Tool Spindle Speed Range | 60～6,000 min-1 | 60～6,000 min-1 | |
| Tool Spindle Driving Motor | AC Servo 4.5kW | AC Servo 4.5kW | |
| Machine dimensions | |||
| Machine Height | 2,180mm | 2,180mm | |
| Floor Space | 3,210 x 1,855 mm | 3,210 x 1,855 mm | |
| Machine Weight | 11,100kg | 11,250kg | |
