Products Lineup
- These CNC turning centers consist of a main spindle fixed on the machine bed, a tool turret traversing on longitudinal and crossing directions (Z & X-axis), and an optional tail stock. They are made for bar-work which does not require machining on the back-side of the work pieces, or chuck-work on cut, forged, or cast pieces loaded either by hand or by a loading system.
- CNC Turning centers with 1 spindles and 1 Turret
BNA- 34C / 42C - Tailstock function enables long shaft operation.
- ♦ Bar capacity: 34mm / 42mm ♦ Max. Machining Length: 175mm ♦ Tailstock Live center:MT2
- CNC Turning Centers for Bar Work
BNC- 34C5 / 42C5 - Capable of bar or chuck work and a shaft work with an optional tail stock.
- ♦ Bar capacity: 34mm / 42mm ♦ 5"chuck ♦ 8-station tool turret ♦ Revolving tool: 4units (max.)
- CNC Turning Centers for Bar Work
BND- 51C5 - Capable of bar or chuck work and a shaft work with an optional tail stock.
- ♦ Bar capacity: 51mm ♦ 5"chuck ♦ 12-station tool turret ♦ Revolving tool: 6 units (max.)
- These CNC turning centers consist of an L-spindle fixed on the machine bed, a longitudinally traversable R-spindle facing against the L-spindle, and one or up to three tool turrets traversable on longitudinal and crossing directions (Z & X-axis). They are capable of a variety of complex work, complete on one machine from bar stock. eliminating the need of secondary machining on the back-side of the work pieces.
- CNC Turning Centers with 2 Spindles and 2 Turrets with Y-axis
ABX- 51SY / 64SY - Two opposing main spindles and two tool turrets with Y-axis slides enable processing of high-end work, complete on one machine from bar stock.
- ♦ Bar capacity: 51mm / 64mm ♦ 12ST.station tool turret: one each on lower & upper positions, total 2 units ♦ Y-axis slide: one on upper position ♦ Revolving drive tools: max. 24 tools
- CNC Turning Center with 2 Spindles, 2 Turrets and 2 Y-axis Slides
ABX- 51TH3 / 64TH3 - Two opposing main spindles and three tool turrets with Y-axis slides enable processing of high-end work, complete on one machine from bar stock.
- ♦ Bar capacity: 51mm / 64mm ♦ 12-station tool turrets: 3 units ♦ Y-axis slides: two on upper positions ♦ Revolving drive tools: max. 36 tools
- CNC Turning centers with 2 spindles, 3 turrets and 3 Y-axis slides
ABX-51THY / 64THY - High productivity with a Y-axis on all three turret
- ♦ Bar capacity: 51mm / 64mm ♦ 12-station turret : 3unit ♦ Revolving drive tools: Max. 36 tools
- CNC Turning centers with 2 spindles and 1 Turret
BNA-34S / 42S - The 8 station turret can index at 16 positions maximum with its half-index mechanism.
- ♦ Bar capacity: 34mm / 42mm ♦ 8-station turret : 1unit ♦ Revolving drive tools: Max. 8 tools
- 2-spindle CNC Turning Center
BND- 51S2 - Front and back-side of bar or chuck work can be complete on one machine by 2 spindles and revolving tools.
- ♦ Bar capacity: 51mm ♦ 6"chuck ♦ 12-station turret ♦ Revolving drive tools: Max. 12 tools
- 2-Spindle CNC Turning Center
BND- 51SY2 - Front and back-side of bar or chuck work can be complete on one machine by 2 spindles and revolving tools with Y-axis slide.
- ♦ Bar capacity: 51mm ♦ 6"chuck ♦ 12-station turret ♦ Revolving drive tools: Max. 12 tools
- CNC Turning Center with 2 Spindles and 2 Turrets
BNE- 34S5 - Two opposing main spindles and two tool turrets enable processing of high-end work, complete on one machine from bar stock.
- ♦ Bar capacity: 34mm ♦ 5"chuck ♦ 12 on upper turret, 12 on lower turret ♦ Revolving drive tools: Max. 12 & 12, total 24 with Y-axis movement
- CNC Turning Center with 2 Spindles and 2 Turrets
BNE- 34SY5 / 51SY5 - Two opposing main spindles and lower and upper turrets with Y-axis slides enable processing of high-end work, complete on one machine from bar stock.
- ♦ Bar capacity: 34mm / 51mm ♦ 5"chuck / 6"chuck ♦ Tool Turret Stations: 12 on upper turret, 12 on lower turret ♦ Revolving drive tools: Max. 12 & 12, total 24
- CNC Turning Center with 2 Spindles and 2 Turrets
BNE- 51S - Two opposing main spindles and lower and upper turrets enable processing of high-end work, complete on one machine from bar stock.
- ♦ Bar capacity: 51mm ♦ 6"chuck ♦ Tool Turret Stations: 12 on upper turret, 10 on lower turret ♦ Revolving drive tools: Max. 6 & 5, total 11
- CNC Turning Center with 2 Spindles and 2 Turrets
BNJ- 34S3 / 42S3 - A 12-station tool turret and a uniquely designed end-working turret provide efficient machining, complete on one machine from bar stock.
- ♦ Bar capacity: 34mm / 42mm ♦ 5"chuck ♦ Tool Turret Stations: 12 & 6 ♦ Revolving drive tools: max. 6
- CNC Turning Center with 2 Spindles and 2 Turrets
BNJ- 34SY3 / 42SY3 / 51SY3 - A 12-station tool turret with Y-axis slide and a uniquely designed end-working turret provide efficient machining, complete on one machine from bar stock.
- ♦ Bar capacity: 34mm / 42mm ♦ 5"chuck ♦ Tool turret stations: 12 & 6 ♦ Revolving drive tools: max. 6
- CNC Turning Center with 2 Spindles and 1 Turret
BNX-42SY - Intergrating the CNC with CITIZEN Control on the highly rigid and precise machine with 2 spindles and 1 turret has made it possible to achieve productivity equivalent to a machine with 2 spindles and 2 turrets.
- ♦ Bar capacity: 42mm ♦ 5"chuck ♦ Tool turret stations: 12 ♦ Revolving drive tools: max. 12
- These CNC Turning Centers consist of a longitudinally traversable spindle (Z-axis), a tool turret traversing on crossing direction (X-axis). They are made for bar-work which does not require machining on the back-side of work pieces, complex work can be done by combination of C-axis and revolving tools.
- CNC Turning Center with 1 Spindle, 1 Turret with Y-axis
BX- 26T - Multifunctional compact machine for small bar-work
- ♦ Bar capacity: 26mm ♦ Tool turret station：Max. 18 ♦ Revolving drive tools ：Max. 8 tools
- These CNC turning centers feature one or two tooling headstocks which index their tools in linear movement, in stead of rotary movement of ordinary tool turrets. They can traverse in X-axis (cross) and Y-axis (vertical) directions. They also feature two longitudinally-traversable main spindles facing against one another. These features enable efficient processing of front and back-side machining in a single, one-machine setup.
- Linear Turret CNC Turning Center with 2 Spindles and 3D Linear Turret
BX-20A - These new machines are designed to provide excellent cost-efficiency in processing small diameter bar-work, complete in one-machine setup.
- ♦ Bar capacity: 20mm ♦ 3D linear turret: 1 unit ♦ Tools: 6 OD tools / 4+4 drilling/boring tools ♦ Revolving drive tools: 3 units
- Linear Turret CNC Turning Center with 2 Spindles and 3D Linear Turret
BX- 20S / 26S - Simultaneous left/right-side machining by two main spindles of identical capacity enables extremely efficient bar-work, complete in a single machine setup.
- ♦ Bar capacity: 20mm / 26mm ♦ 3D linear turret: 2 units ♦ Tool stations (L & R-turrets): 18 / 7 stations ♦ Revolving tool: 3
- These CNC lathes consist of fixed-type main spindle, rotary-type tool turret on cross (X-axis) and longitudinal (Z-axis) slides, and optional tail stock. These machines are designed for bar-work process that does require cross drilling/milling, or back-side machining, and chuck-work on cut-blanks, forged pieces or cast blanks.
- High-rigidity CNC Lathe for Hard Turning
LX- 06E2 - Combined with an automatic loading system, powerful secondary turning operation is possible, that includes hard turning process.
- ♦ 6"chuck ♦ Wedge-clamp type 8-station tool turret ♦ High speed gantry loading system ♦ Programmable CNC loaders
- High-rigidity CNC Lathe for Hard Turning
LX- 08C - Featuring direct wedge-clamp system, powerful secondary turning operation is possible, that includes hard turning process.
- ♦ 8"chuck ♦ Wedge-clamp type 10-station tool turret ♦ Tail stock: 3 types (optional) ♦ Gantry loading system and work stocker
- High-rigidity CNC Lathe for Hard Turning
LX- 08E2 - Featuring direct wedge-clamp system, powerful secondary turning operation is possible, that includes hard turning process.
- ♦ 8"chuck ♦ Wedge-clamp type 8-station tool turret ♦ Complete work-handling system, including a gantry loading system and a work stocker
- High-rigidity CNC Lathe for Hard Turning
LX- 08R - Bar, chuck-work, and shaft-turning process is possible by a powerful tail stock.
- ♦ 8"chuck ♦ 10-station tool turret ♦ Revolving drive tools: max. 5 ♦ Gantry loading system and work stocker
- These CNC lathes consist of a traveling main spindle on longitudinal (Z-axis) slide, a rotary-type tool turret on cross (X-axis) slide. Turning operation involves feeding by the main spindle and the tool turret. The self-traversing main spindle takes part of automatic loading process to handle chuck-work of cut-blanks, forged pieces, or cast pieces.
- Self-loading type CNC Turning Center
LZ- 01R2 / 02R2 - A unique, high speed self-loading main spindle and revolving tools provide complete machining of small pieces in a single-machine setup.
- ♦ 6" / 8"chuck ♦ 12-station turret ♦ Revolving tools: max. 6
- Self-loading type CNC Turning Center
LZ- 01RY2 / 02RY2 - A unique, high speed self-loading main spindle and revolving tools with Y-axis provide complete machining of small pieces in a single-machine setup.
- ♦ 6" / 8"chuck ♦ 12-station turret ♦ Revolving tools: max. 6 with Y-axis
- These NC lathes consist of main spindle fixed on machine bed and linear turret traversable on cross (X-axis) and longitudinal (Z-axis) directions. They are designed for bar-work that does not require back-side machining or chuck-work on cut-blanks, forged pieces, or cast pieces with an automatic loading system.
- High precision Linear Turret CNC Lathe
RL01 - High-precision, small-diameter chucker with required floor space of only 1.0m2
- ♦Max. machining diameter:10mm ♦ Max.machining length:50mm ♦ Collet chuck system ♦ loading system
- High-precision Linear Turret CNC Lathe
GN- 3000 - Featuring a machine base incorporating thermally-symmetric design and an inner wind-tunnel, a thermally-symmetric wing-type main spindle, this model is designed for high precision secondary turning process.
- ♦ 3"/ 4"precision air chuck ♦ Collet chuck system ♦ High speed automatic loading system ♦ A variety of work handling robotic loading system
- High precision Horizontal Linear Turret CNC Lathe
GN- 3200 - Whilst maintaining high accuracy and high efficiency on featuring of GN series, the floor space has been reduced by 37% compared to existing GN models.
- ♦ 3"/ 4"precision air chuck ♦ Collet chuck system ♦ High speed gantry loader ♦ A variety of IN/OUT Stocker system
- High precision Linear Turret CNC Lathe
RL03 - High slide tracking and shaping accuracy
- ♦3"/ 4"precision air chuck ♦ Collet chuck system ♦ High speed gantry loader ♦ A variety of IN/OUT Stocker system
- High-precision Linear Turret CNC Lathe
GN- 4 - Featuring a machine base incorporating thermally-symmetric design and an inner wind-tunnel, a thermally-symmetric wing-type main spindle, this model is designed for high precision secondary turning process.
- ♦ 3"/ 4"precision air chuck ♦ Collet chuck system ♦ High speed automatic loading system ♦ A variety of work handling robotic loading system
- These high-precision CNC lathes consist of front-loading type L & R main spindles with a built-in drive motor that traverse in longitudinal (Z-axis) direction and two linear turrets that traverse on cross (X-axis) direction. A built-in, high-speed automatic loading system enable highly efficient front & back or front & front turning operation.
- 2-spindle High Precision Horizontal Linear Turret CNC Lathe
GN- 3200W - Whilist maintaining high accuracy and high efficiency on featuring of GN series, the floor space has been reduced by 37% compared to existing GN models.
- ♦ 3"/ 4"precision air chuck ♦ Collet chuck system ♦ High speed gantry loader ♦ A variety of IN/OUT Stocker system
- Yutora Series de-oiling systems are designed to separate water-soluble or non-water-soluble coolant from swarfs and continuously recycle during the operation, by means of high-power centrifugal separator. We highly recommend using these systems for environmental measures, such as, energy conservation, environmental maintenance, and pollution prevention.
- Automatic Swarf-deoiling Systems
YUTORA 100 - Swarf intake through continuous de-oiling is integrated in a compact, integrated system.
- ♦ Swarf processing capacity: 100L/h ♦ Hopper capacity: 60L
- Automatic Swarf-deoiling Systems
YUTORA 300 - Swarf intake through continuous de-oiling is integrated in a compact, integrated system.
- ♦ Swarf processing capacity: 300L/h ♦ Hopper capacity: 200L
- Automatic Swarf De-oiling System
YUTORA 300- P - Swarf intake through continuous crushing, and continuous de-oiling is processed in an integrated system.
- ♦ Swarf processing capacity: 300L/ｈ ♦ Hopper capacity: 230L
- Automatic Swarf De-oiling System
YUTORA 300- PW - Swarf intake through continuous crushing, and continuous de-oiling is processed in an integrated system.
- ♦ Swarf processing capacity: 300L/ｈ ♦ Hopper capacity: 400L
- For automated bar-feeding process, make your selection by the bar diameter, stock capacity of the bar material, your needs of bar material support system, such as, oil-support system, or roller support system.
- ASR F34M
- Automatic single-bar feeder equipped with oil hydromechanics
- ASR FX- 45
- Automatic single-bar feeder equipped with oil hydromechanics, for high-speed precision machining
- ASR PX- 45 / 65
- Pull-out type (no feeding mechanism) single-bar stock device equipped with oil hydromechanics
- ASR X- 20Y / 34M
- Magazine-loading automatic bar feeder equipped with oil hydromechanics, for small and medium diameters
- ASR X- 32PN2
- Magazine-loading automatic bar feeder equipped with oil hydromechanics, for small and medium diameters
- ASR X- 45M / 51M
- Magazine-loading automatic bar feeder equipped with oil hydromechanics, for medium and large diameters
- ASQ- 51 / 80
- Magazine-loading automatic bar feeder for smaller lengths (maximum length: spindle length)
- AX- 3 / 5
- Roller-support-type magazine-loading automatic bar feeder for medium and large diameters
- PF- V2S / V3S
- Belt-support-type magazine-loading automatic bar feeder for medium and large diameters
- SWP- M15
- Long-shaft work loader/unloader for twin opposing spindles
- DC- 45
- Bar-end processing machine
- High-pressure coolant systems are systems which help break up and wash away the swarf, helping extend tool life and stabilize machine operation.
- MS- 60M
- Equipped with a magnetic separator to eliminate ferrous powder
- (maximum discharge pressure: 6.0 Mpa)
- MS- 60C
- Equipped with a centrifugal separator to eliminate ferrous powder
- (maximum discharge pressure: 6.0 Mpa)
- MS- 60P
- Equipped with paper filters to eliminate ferrous powder from cast iron
- (maximum discharge pressure: 6.0 Mpa)
- HP- 40
- Compact, side-mounted type
- (maximum discharge pressure: 4.0 Mpa)
- Miyano has provided a variety of options to save your time and costs involving work-handling by human operators. From robotic loading systems to built-in type gantry loaders, and tray-type work-piece stockers and lots more, we offer a wide variety of combinations to fit your needs.
- Robotic Loading Systems
We provide a variety of work-handling robotic loading systems to enable multiple, small lot productions of different workpieces in the same line. Our GN-series provide excellent work-handling systems utilizing these robotic loaders
- Gantry Loaders
Overhead-type gantry loaders, or enclosed-type loaders are safe to operate and provide flexibility to be integrated with a variety of work-handling devices, such as, tray-change type work-piece stockers, to build a work-handling system of maximum efficiency. Our LX-series single-spindle CNC lathes provide excellent efficiency utilizing these gantry-loading work-handling systems.
- Tray-exchange-type Work Stocker
These work stockers work well with a variety of work-pieces and work-conveying devices. Coordinating with in-line work-conveying helps manage work-piece data of the entire production line to achieve higher level of production management.
